Eddy current separator
Nonferrous eddy current separator is a machine that uses a powerful magnetic field to separate non-ferrous metals from an input waste or ore stream. The device makes use of eddy currents to effect the separation. Aluminum, copper and die-cast metals material is typically separated by the nonferrous eddy current separator.
In waste processing, nonferrous eddy current separator is used after all ferrous metals have been removed previously by some arrangement of magnets. Eddy current separators are typically used at the end of the waste material stream, since ferrous metals will become heated when exposed to an eddy current field, leading to potential damage to the eddy current separator.
Make an inquiry
Introduction:
Nonferrous eddy current separator is a machine that uses a powerful magnetic field to separate non-ferrous metals from an input waste or ore stream. The device makes use of eddy currents to effect the separation. Aluminum, copper and die-cast metals material is typically separated by the nonferrous eddy current separator.
Nonferrous eddy current separator is a machine that uses a powerful magnetic field to separate non-ferrous metals from an input waste or ore stream. The device makes use of eddy currents to effect the separation. Aluminum, copper and die-cast metals material is typically separated by the nonferrous eddy current separator.
In waste processing, nonferrous eddy current separator is used after all ferrous metals have been removed previously by some arrangement of magnets. Eddy current separators are typically used at the end of the waste material stream, since ferrous metals will become heated when exposed to an eddy current field, leading to potential damage to the eddy current separator.
This equipment is widely application in:
1.Separate the non-ferrous metals from smash material
2.Separate aluminum and copper from aluminum bronze casting sand and smelting ash.
3.remove aluminum cap from a glass bottle
4.Separate aluminum and copper from lump material.
5.Separate the non-ferrous metals from incineration of printing plate.
6.Separate aluminum cans from the city rubbish.
7.Separate aluminum wire and aluminum alloy.
Drawing:
Drawing:
Technical specifications:
|
Model
|
Belt width(mm)
|
Power |
Capacity |
Overall dimension
(mm)
|
Weight |
|
LECS-60
|
650
|
4.0
|
6
|
2250×1750×1075
|
1100
|
|
LECS-80
|
800
|
5.5
|
7.5
|
2360×1960×1110
|
1200
|
|
LECS-100
|
1000
|
5.5
|
9
|
2470×2200×1140
|
1400
|
|
LECS-120
|
1200
|
7.5
|
12
|
2560×2450×1180
|
1500
|
ChatNow
WhatsApp
Email